News
Successfully commissioned a Bogie Hearth Furnace for Arcelor Mittal Nippon Steel
Successfully commissioned a Pusher Reheat Furnace for Anjar TMT (Welspun Group)
We are pleased to have successfully commissioned a Pusher Furnace for reheating of steel billets, for Anjar TMT (Welspun Group).
The Furnace is of 20 MT/hr capacity, and is suitable for firing with HFO / natural gas.
Korus Engineering Solutions are the Consultants for the Project.
Successfully commissioned Bell Annealing Furnaces for Pennar Group
We are pleased to have successfully commissioned Bell Annealing Furnaces, along with associated equipment, for Pennar Group, for bright annealing of steel strip coils in hydrogen atmosphere.
The installation comprises of 2 nos. Annealing Bases, 2 nos. Inner Covers, 1 no. Heating Hood, 1 no. Cooling Hood, Valve Stands, MCC and PLC System The equipment is designed for production capacity of 35,450 MT/annum.
Charge stack is of 1,900 mm diameter and 3,100 mm height. Maximum charge stack weight is 57.2 MT, including convectors.
Fuel is C9, and the combustion system is on pulse-firing basis. The furnace is designed for 850°C maximum temperature. The Application Software, control philosophy and engineering details for the Project are developed jointly with Autodata, our Channel Partners.
This is a repeat order from Pennar Group, of Bell Annealing Furnaces. This is the best compliment that we can receive from Pennar Group.
Successfully commissioned a Roll-Down Furnace for JR Seamless
We are pleased to have successfully commissioned a Roll-Down Furnace for reheating of steel rounds, for JR Seamless.
The Furnace is of 12 MT/hr capacity, and is suitable for firing with HFO / clean producer gas.
Currently executing an order for Bell Annealing Furnaces for B5 Plus Group, Ghana
We are pleased to have recently received an order for Bell Annealing Furnaces, along with associated equipment, from B5 Plus, Ghana, for bright annealing of steel strip coils / wire coils in nitrogen atmosphere.
Maximum charge stack weight will be 30 MT.
Fuel will be HFO / natural gas.
Manufacturing activities are going on currently.
Successfully commissioned Bell Annealing Furnaces for APL Apollo Group
We are pleased to have successfully commissioned Bell Annealing Furnaces, along with associated equipment, for APL Apollo Group, for bright annealing of steel strip coils in hydrogen atmosphere.
The installation comprises of 6 nos. Annealing Bases, 6 nos. Inner Covers, 3 nos. Heating Hood, 3 nos. Cooling Hood, Valve Stands, MCC and PLC System.
Charge stack is of 2,100 mm diameter and 5,100 mm height. Maximum charge stack weight is 100 MT, including convectors.
Fuel is LPG, and the combustion system is on pulse-firing basis.
Successfully completed the fuel conversion of Roller Hearth Furnace at Tube Investments Group of Industries
We are pleased to have completed the fuel conversion of existing Roller Hearth Furnace at Tube Investments Group of Industries.
The furnace is of 3 MT/hr capacity, and is now suitable for firing with propane / natural gas.
The project has been successfully completed, and the customer is happy with our prompt service.
Successfully commissioned Bell Annealing Furnaces for Prompt
We are pleased to have successfully commissioned Bell Annealing Furnaces, along with associated equipment, for Prompt, for bright annealing of steel strip coils in hydrogen atmosphere.
Successfully commissioned a Roller Hearth Furnace for Jindal Saw
We are pleased to have successfully commissioned a Roller Hearth Furnace for Jindal Saw, for solution annealing of stainless steel tubes.
The furnace capacity is 2 MT/hr, and it is LPG-fired.
Successfully commissioned Bell Annealing Furnaces for Hansa Metallics
We are pleased to have successfully commissioned Bell Annealing Furnaces, along with associated equipment, for Hansa Metallics, for bright annealing of stainless steel strip coils in hydrogen atmosphere.
The installation comprises of 4 nos. Annealing Bases, 4 nos. Inner Covers, 2 nos. Heating Hoods, 2 nos. Cooling Hoods, Valve Stands, MCC and PLC System The equipment is designed for production capacity of 84,000 MT/annum.
Charge stack is of 2,000 mm diameter and 5,500 mm height. Maximum charge stack weight is 110 MT. Fuel is LPG, and the combustion system is on pulse-firing basis.
This is a repeat order from Hansa Metallics, of Bell Annealing Furnaces. This is the best compliment that we can receive from Hansa Metallics.
Successfully commissioned a Pusher Reheat Furnace for Rungta Mines
We are pleased to have successfully commissioned a Pusher Furnace for reheating of steel billets, for Rungta Mines. The Furnace is of 20 MT/hr capacity, and is suitable for firing with LDO.
Charge is typically 130 mm billets, of 9,000 mm length (single row charging).
Korus Engineering Solutions are the Consultants for the Project.
This is a repeat order from Rungta Mines, of Pusher Reheat Furnace. This is the best compliment that we can receive from Rungta Mines.
Currently executing an order for a Roller Hearth Furnace for TI Group
We are pleased to have recently received an order for a Roller Hearth Furnace, from TI Group, for bright annealing of carbon steel tubes.
The furnace capacity will be 4 MT/hr, and it will be suitable for gas-firing.
This is a repeat order on us, and it is the best compliment we could ever receive from TI Group.
Site erection activities are going on presently.
Currently executing an order for a Roller Hearth Furnace for TI Group
We are pleased to have recently received an order for a Roller Hearth Furnace, from TI Group, for bright annealing of carbon steel tubes.
The furnace capacity will be 4 MT/hr, and it will be suitable for gas-firing.
This is a repeat order on us, and it is the best compliment we could ever receive from TI Group.
Manufacturing activities are going on presently.
Successfully commissioned fuel conversion of an existing Roller Hearth Furnace for TI Group
We are pleased to have successfully commissioned fuel conversion of an existing Roller Hearth Furnace, for TI Group, for bright annealing of carbon steel tubes.
Successfully commissioned Bell Annealing Furnaces for Radiant Industries
We are pleased to have successfully commissioned Bell Annealing Furnaces, along with associated equipment, for Radiant Industries, for bright annealing of low carbon steel wire coils in nitrogen atmosphere.
The installation comprises of 1 no. Annealing Base, 1 no. Inner Cover, 1 no. Heating Hood, Valve Stands, MCC and PLC System.
Charge stack is of 1,350 mm diameter and 3,000 mm height. Maximum charge stack weight is 7 MT.
The furnace is electrically heated, and is designed for 900 °C maximum temperature.
All other properties in the Annealed Charge have been achieved, as required.
Successfully commissioned a Top-and-Bottom Fired Pusher Furnace for National, Egypt
We are pleased to have successfully commissioned a Top-and-Bottom Fired Pusher Furnace for National Steel, Egypt, for reheating of steel blooms.
The Furnace is of 70 MT/hr capacity, and is suitable for firing with Natural Gas.
Charge is typically 250 mm x 350 mm blooms, of 6,000 mm length (single row charging).
The Furnace has Level-1 Automation.
Successfully commissioned a Roller Hearth Furnace for Lal Baba Seamless
We are pleased to have successfully commissioned a Roller Hearth Furnace, for Lal Baba Seamless, for bright annealing of carbon steel tubes.
The furnace capacity is 4 MT/hr, and it is suitable for firing with natural gas.
Successfully commissioned a Bogie Hearth Furnace for Jindal Stainless
We are pleased to have recently received an order for a Bogie Hearth Furnace, from Jindal Stainless, for heat-treating of stainless steel plates.
We are pleased to have successfully commissioned a Bogie Hearth Furnace, for Jindal Stainless, for heat-treating of stainless steel plates.
The furnace capacity is 100 MT/batch, and it is suitable for firing with LPG / propane / mixed gas.
Successfully commissioned a Roller Hearth Furnace for Good Luck Group
We are pleased to have successfully commissioned capacity upgradation work on a Roller Hearth Furnace, for Good Luck Group.
The furnace capacity is upgraded to 3 MT/hr, and it is suitable for firing with LPG / natural gas.
The furnace is used for bright annealing of carbon steel tubes.
Currently executing an order for a Sloping Hearth Furnace for Jindal Saw
We are pleased to have received an order for a Sloping Hearth Furnace, from Jindal Saw.
The charge material will be carbon steel pipes.
The furnace capacity will be 40 MT/hr, and it will be electrically-heated.
The furnace will be used for tempering operation.
Manufacturing activities are going on currently.
Successfully commissioned a Roller Hearth Furnace for Good Luck Group of Industries
We are pleased to have successfully commissioned a Roller Hearth Furnace, for Good Luck Group of Industries, for bright annealing of carbon steel / boiler steel tubes.
The furnace capacity is 2 MT/hr, and it is natural gas-fired.
This is a repeat order from Good Luck, and is hence the best compliment that we can receive from Good Luck.
We are pleased to have successfully commissioned a Bogie Hearth Furnace for Arcelor Mittal Nippon Steel.
The furnace will be used for normalizing of thick plates.
The furnace capacity is 100 MT/batch, and it is natural gas-fired.