News
Successfully commissioned Bell Annealing Furnaces for APL Apollo Group
Successfully completed the fuel conversion of Roller Hearth Furnace at Tube Investments Group of Industries
We are pleased to have completed the fuel conversion of existing Roller Hearth Furnace at Tube Investments Group of Industries.
The furnace is of 3 MT/hr capacity, and is now suitable for firing with propane / natural gas.
The project has been successfully completed, and the customer is happy with our prompt service.
Successfully commissioned Bell Annealing Furnaces for Prompt
We are pleased to have successfully commissioned Bell Annealing Furnaces, along with associated equipment, for Prompt, for bright annealing of steel strip coils in hydrogen atmosphere.
Successfully commissioned a Roller Hearth Furnace for Jindal Saw
We are pleased to have successfully commissioned a Roller Hearth Furnace for Jindal Saw, for solution annealing of stainless steel tubes.
The furnace capacity is 2 MT/hr, and it is LPG-fired.
Successfully commissioned Bell Annealing Furnaces for Hansa Metallics
We are pleased to have successfully commissioned Bell Annealing Furnaces, along with associated equipment, for Hansa Metallics, for bright annealing of stainless steel strip coils in hydrogen atmosphere.
The installation comprises of 4 nos. Annealing Bases, 4 nos. Inner Covers, 2 nos. Heating Hoods, 2 nos. Cooling Hoods, Valve Stands, MCC and PLC System The equipment is designed for production capacity of 84,000 MT/annum.
Charge stack is of 2,000 mm diameter and 5,500 mm height. Maximum charge stack weight is 110 MT. Fuel is LPG, and the combustion system is on pulse-firing basis.
This is a repeat order from Hansa Metallics, of Bell Annealing Furnaces. This is the best compliment that we can receive from Hansa Metallics.
Successfully commissioned a Pusher Reheat Furnace for Rungta Mines
We are pleased to have successfully commissioned a Pusher Furnace for reheating of steel billets, for Rungta Mines. The Furnace is of 20 MT/hr capacity, and is suitable for firing with LDO.
Charge is typically 130 mm billets, of 9,000 mm length (single row charging).
Korus Engineering Solutions are the Consultants for the Project.
This is a repeat order from Rungta Mines, of Pusher Reheat Furnace. This is the best compliment that we can receive from Rungta Mines.
Successfully commissioned a Roller Hearth Furnace for TI Group
We are pleased to have successfully commissioned a Roller Hearth Furnace for TI Group, for bright annealing of carbon steel tubes.
The furnace capacity is 4 MT/hr, and it is suitable for gas-firing.
This is a repeat order on us, and it is the best compliment we could ever receive from TI Group.
Successfully commissioned a Roller Hearth Furnace for TI Group
We are pleased to have successfully commissioned a Roller Hearth Furnace for TI Group, for bright annealing of carbon steel tubes.
The furnace capacity is 4 MT/hr, and it is suitable for gas-firing.
This is a repeat order on us, and it is the best compliment we could ever receive from TI Group.
Successfully commissioned fuel conversion of an existing Roller Hearth Furnace for TI Group
We are pleased to have successfully commissioned fuel conversion of an existing Roller Hearth Furnace, for TI Group, for bright annealing of carbon steel tubes.
Successfully commissioned Bell Annealing Furnaces for Radiant Industries
We are pleased to have successfully commissioned Bell Annealing Furnaces, along with associated equipment, for Radiant Industries, for bright annealing of low carbon steel wire coils in nitrogen atmosphere.
The installation comprises of 1 no. Annealing Base, 1 no. Inner Cover, 1 no. Heating Hood, Valve Stands, MCC and PLC System.
Charge stack is of 1,350 mm diameter and 3,000 mm height. Maximum charge stack weight is 7 MT.
The furnace is electrically heated, and is designed for 900 °C maximum temperature.
All other properties in the Annealed Charge have been achieved, as required.
Successfully commissioned a Top-and-Bottom Fired Pusher Furnace for National, Egypt
We are pleased to have successfully commissioned a Top-and-Bottom Fired Pusher Furnace for National Steel, Egypt, for reheating of steel blooms.
The Furnace is of 70 MT/hr capacity, and is suitable for firing with Natural Gas.
Charge is typically 250 mm x 350 mm blooms, of 6,000 mm length (single row charging).
The Furnace has Level-1 Automation.
Successfully commissioned a Roller Hearth Furnace for Lal Baba Seamless
We are pleased to have successfully commissioned a Roller Hearth Furnace, for Lal Baba Seamless, for bright annealing of carbon steel tubes.
The furnace capacity is 4 MT/hr, and it is suitable for firing with natural gas.
Successfully commissioned a Bogie Hearth Furnace for Jindal Stainless
We are pleased to have successfully commissioned a Bogie Hearth Furnace, for Jindal Stainless, for heat-treating of stainless steel plates.
The furnace capacity is 100 MT/batch, and it is suitable for firing with LPG / propane / mixed gas.
Successfully commissioned a Roller Hearth Furnace for Good Luck Group
We are pleased to have successfully commissioned capacity upgradation work on a Roller Hearth Furnace, for Good Luck.
The furnace capacity has been upgraded to 3 MT/hr, and it is suitable for firing with NG.
The furnace is used for bright annealing of carbon steel tubes.
Successfully commissioned a Walking Hearth Furnace for Jindal Saw
We are pleased to have successfully commissioned a Walking Hearth Furnace, for Jindal Saw.
The charge material is carbon steel pipes.
The furnace capacity is 40 MT/hr, and it is suitable for electrical heating.
The furnace is used for tempering operation.
Successfully commissioned a Roller Hearth Furnace for Good Luck Group of Industries
We are pleased to have successfully commissioned a Roller Hearth Furnace, for Good Luck.
The furnace capacity is 2 MT/hr, and it is suitable for firing with LPG / NG.
The furnace is used for bright annealing of carbon steel tubes.
Successfully commissioned a Forging Furnace for Sunflag Iron & Steel
We are pleased to have successfully commissioned a Forging Furnace for Sunflag Iron & Steel.
The furnace is electrical-heated, and is used for forging of trial billets.
The furnace is mainly for their R&D purposes.
Successfully commissioned a Bogie Hearth Furnace for Fittech
We are pleased to have successfully commissioned a Bogie Hearth Furnace for Fittech.
The furnace capacity is 5 MT/batch, and it is suitable for firing with LPG.
The furnace is going to be used for heat treatment of carbon / alloy steel pipe fittings.
Successfully commissioned Bell Annealing Furnaces for Hansa Metallics
We are pleased to have successfully commissioned Bell Annealing Furnaces, along with associated equipment, for Hansa Metallics, for bright annealing of stainless steel strip coils in hydrogen atmosphere.
The installation comprises of 4 nos. Annealing Bases, 4 nos. Inner Covers, 2 nos. Heating Hoods, 2 nos. Cooling Hoods, Valve Stands, MCC and PLC System The equipment is designed for production capacity of 84,000 MT/annum.
Charge stack is of 2,000 mm diameter and 5,500 mm height. Maximum charge stack weight is 110 MT.
Fuel is LPG, and the combustion system is on pulse-firing basis.
Successfully commissioned a Bogie Hearth Furnace for El Nasr Group, Egypt
We are pleased to have successfully commissioned a Bogie Hearth Furnace for El Nasr Group, Egypt.
The furnace capacity is 25 MT/batch, and it is suitable for firing with natural gas.
The furnace is going to be used for stress relieving / annealing of finished assemblies.
Successfully commissioned a Roller Hearth Furnace for Venus Pipes & Tubes
We are pleased to successfully commissioned a Roller Hearth Furnace for Venus Pipes & Tubes, for solution annealing of stainless steel tubes.
The furnace capacity is 500 kg/hr, and it is LPG-fired.
We are pleased to have successfully commissioned Bell Annealing Furnaces, along with associated equipment, for APL Apollo Group, for bright annealing of steel strip coils in hydrogen atmosphere.
The installation comprises of 6 nos. Annealing Bases, 6 nos. Inner Covers, 3 nos. Heating Hood, 3 nos. Cooling Hood, Valve Stands, MCC and PLC System.
Charge stack is of 2,100 mm diameter and 5,100 mm height. Maximum charge stack weight is 100 MT, including convectors.
Fuel is LPG, and the combustion system is on pulse-firing basis.